3. Setting the modification method and modification amount
4. Confirming after modification
5. Confirming with the Standard screen
[12]-16
* To set the method, press
(pattern data after modification stitch
fixed), and move to the modification
position (point D') using the arrow
mark keys.
* Press
(The stitch position will be modified.)
[Memo] Move the stitch length so that it
is within the range of 12.7mm at
the maximum.
* Quit the modification mode.
Press
screen.
(When
the modifications executed last will be
undone.)
* The stitch position has been modified.
Modification mode
.
to return to the Standard
is pressed,