Modifying A Block 2 (Broken Line, Arc, Curve Input) [12]-29 - Mitsubishi PLK-E Series Technical Manual

(16) Modifying a block 2 (Broken line, arc, curve input)
Methods for designating the modification position with the jog keys.
using the modification origin data as a reference.)
[Example] The C point and D point in the following type of data are each modified to the C' point and D'
point.
Operation details
1. Selecting block modification
2. Selecting the input type
* Enter the modification mode. (Refer to
the methods for entering the
modification mode.)
* Press Stitch Data Change
Block Modify
* Press
* In this case,
press Broken Line
* Press
[12]-29
Modification mode
(This is handy when
and
.
to open the next screen.
.
to set the data.