Table of Contents
Advertisement
Explanations of basic screens, keys and operations
Restitching methods
Restitching can be carried out using the previously explained halt function.
If the operation is halted due to needle thread breakage, etc., set the needle at the UP position, and
then using the forward jog/reverse jog keys, move to the position where the thread broke. Tie the
needle thread, etc., and restart stitching by pressing the start switch.
* If the start switch is turned ON while treading the needle, the sewing machine could
start rotating and create a very hazardous state. Never turn the start switch ON during this time.
Move the foot switch away from your feet area so that the start switch is not turned ON
inadvertently.
Hide quick links:
Advertisement
Table of Contents
