Home Position Correction [13]-3 - Mitsubishi PLK-E Series Technical Manual

Data conversion mode
(5) Home position correction
[Example] The mechanical home position can be moved in 0.1mm increments.
Operation details
1. Selecting home position correction
2. Determining the home position correction position
[Memo] The movement amount must be within
12.7mm.
* Enter the conversion mode.
* Press Home position Correction
* Press
Note that when Enter is pressed, the
work holder will move to the home
position correction position which is
already input.
* Press Home position Correction
Valid
: Home position Correction
invalid
: Home position Correction
valid
* Using the arrow keys, move to and set
the correction position.
( from
* Press
[13]-3
.
.
to )
.
.