Mitsubishi PLK-E Series Technical Manual page 201

Program mode
4. Setting Value Change panel (for STF)
[In this case, the CP/ST status is set, but depending on the function, there may be a value
setting and ON/OFF setting in addition to the status setting. Refer to the [Memo] at the end of
the section.]
5. Function Explanation panel (for STF setting value CP)
Memo [To input numeric value] When changing the value on the Setting Value Change panel, the
following type of panel will open.
[16]-2
* This Setting Value Change panel may
also have several pages depending
on the mode.
Press the
change the page.
Press the setting value key and change
the setting. (In this case, press "CP".)
* Press
The previous panel will open.
[Memo] When
the Function Explanation panel
will open. (The explanation
displayed at the right of the setting
value panel can be viewed in its
entirety.)
* This Function Explanation panel also
has several pages.
Press the
change the page.
Memo If the color of the function
explanatory sentence is inverted
and the set value is not displayed,
judge that the sentence explains
the entire setting item.
* Change the setting with the numeric
keypad, etc.
* Press
The system will return to the previous
panel.
keys to
to fix the setting.
is pressed,
keys to
to determine the value.