7-13. Adjustment of the fixed knife position
(1) Open the cylinder cover (No.1).
(2) Remove the E-shaped snap ring (No.4), which engages the movable knife (No.2) and the link (No.3).
(3) Loosen the setscrews (No.5) then, remove the sliding plate (No.6).
(4) Turn the sliding plate (No.6) upside down and loosen two setscrews (No.9) then, adjust the fixed
knife (No.10) position to be positioned for the blade edge (No.7) to have the clearance 0.5mm from
the edge of the needle plate (No.8).
(5) After the adjustment, tighten the setscrews (No.9) securely.
(6) Put all the parts for this adjustment back to the original locations.
- 27 -