Mitsubishi PLK-E Series Technical Manual page 42

6. Creating the arc input data
7. Completing creation of the arc input data
8. Inputting the return/end code
Methods of creating stitching data
[9]-5
* The confirmation message "Create
arc" will appear.
* Press
data entry screen.
* Press
the arc input data.
(The arc will be created.)
* A message indicating that the data is
being created will appear.
* Press
* Press
(Data on feed data to the home position
and the end code will be created.)
The work holder will automatically return
to the home position. Take care when
the needle is lowered, etc.
* A prompt for home position return will
appear.
Press
The needle will rise to the UP
position.
If the needle is not at the UP position,
it may lower once and then return to
the UP position
* A message indicating that the data is
being created will appear, and then
the Standard screen will reappear.
to return to the point C
and start creation of
.
.
.