Table of Contents
Advertisement
Methods of creating stitching data
(internal memory).)
Memo
If the distance between the curve start point and the end point is less than 0.5 mm, the
pattern will be regarded as the "closed pattern", and the same coordinate value will be
automatically set for both the start point and end point.
Precautions for inputting a curve
* For shape data as shown below, continuous curve input is possible by selecting a delimiter point
where the corner is pointed (K point).
(This can also be applied for noncontinuous points such as for offset stitching, multiple stitching,
and reverse multiple stitching.)
* If the data must be modified, refer to
section [12] Modification mode
Modifying the stitching data.
[9]-14
Hide quick links:
Advertisement
Table of Contents
