Modifying The Stitching Speed (N Stitches After Designated Position) [12]-50 - Mitsubishi PLK-E Series Technical Manual

Modification mode
(22) Modifying the stitching speed (N stitches after designated position)
[Example] The stitching speed for three stitches after the B point in the following type of stitching data
will be changed to medium-high speed(MD1).
Operation details (N stitches after designated position)
1. Selecting stitching speed modification
2. Determining the modification position
[12]-49
* Enter the modification mode.
* Press Stitching Speed Change
* Press
* Using Jog
the start point position to be
modified.(B point)
* Press
the positions.
to open the next screen.
, , determine
after determining
.