Mitsubishi PLK-E Series Technical Manual page 10

Explanations of basic screens, keys and operations
The Bobbin Winding screen is explained below.
This screen is used to wind thread on the bobbin. (The presser bar lifting will lower when the bobbin
winding key is pressed on the Standard screen 2.)
When the work holder switch is turned ON and the start switch is turned ON, the sewing machine will
start rotating at the set speed. The XY table will not move at this time. The sewing machine will stop at
the needle UP position when the start switch is turned OFF.
* The bobbin winding operation is determined by the program mode setting. Refer to [16]Program
mode for details on the setting methods.
Exits the bobbin
winding mode
Explanations of basic keys
The basic keys used commonly on several screens are explained in this section. Refer to the "Appendix
List of keys" for details on the other keys.
... Executes home position return.
... Enter/determines the settings, etc.
... Returns to the previous screen.
... Exits the current mode.
... Cancel/undo the previous operation.
... Opens the menu window.
... Displays the previous/next list when lists are displayed (pattern data list, mode list, etc.)
... Turns skip jogging ON/OFF, and opens the operation setting screens.
(Refer to page[8]-6.)
[3]-4
Displays the current
setting value.