Entering The Conversion Mode [13]-2; Quitting The Conversion Mode [13]-2; Confirming On The Image Screen (For The Conversion Mode) [13]-2 - Mitsubishi PLK-E Series Technical Manual

(2) Entering the conversion mode
(3) Quitting the conversion mode
(4) Confirming on the image screen (for the conversion mode)
(Refer to the section "Confirming on the image screen " for the modification mode for explanations
common for the modification mode and conversion mode.)
* Scaling, rotation
* Press
the Standard screen to enter the
conversion mode.
* After converting the data, press
to quit the conversion mode.
(When
the conversions executed last will be
undone.)
: Indicates the home position.
(Common for all Image screens.)
: Indicates the center position.
[13]-2
Data conversion mode
and on
is pressed,