Mitsubishi PLK-E Series Technical Manual page 65

2. Setting the back tacking details
3. Confirming the data
Memo Regarding back tacking mode
V mode: Back tacking will be performed
only once.
N mode: Back tacking will be performed
twice.
M mode: Back tacking will be performed
third.
W mode: Back tacking will be performed
fourth.
Methods of creating stitching data
[9]-27
* The details are set on this screen.
(The details set here are,
(start/end back tacking)), start mode
(N mode), three start stitches, end
mode
stitches.)
* Press
values.
* The system will return to the input
method setting screen.
* Press
values.
* The system will return to the arrow
input screen.
* Determine the B point with the linear
input procedures, and create a linear
line.
(A straight line having start back
tacking and end back tacking will be
created.)
* After creating the linear line,
input
* The start/end back tacking data for the
linear line has been created.
Memo Regarding number of stitches
Press the key of the desired position
( or
After that, set data using the numeric keys
(N mode), three end
to determine these set
to determine the set
.
) to invert the key.
or .