Mitsubishi PLK-E Series Technical Manual page 177

3. Confirming on the image screen
4. Setting the conversion method
[13]-23
* press
displayed
in step 2.
* Confirm the multiple No., etc.
* Press
the original screen.
* Select and input the multiple
stitching method, direction,
distance and number of times.
Multiple (Feed data)
Multiple (Stitching
Reverse Multiple
(Feed data)
Reverse Multiple
(Stitching specifications)
In this case, select the "Multiple
(Stitching specifications)")
* Select the direction. (In this case,
select "right".)
Left direction
Right direction
* Input the distance value. (In this
case, input "10 mm".)
* Input the number of times. (In this
case, input "3 times".)
* Press
Data conversion mode
on the screen
to return to
specifications)
.