Mitsubishi PLK-E Series Technical Manual page 74

Methods of creating stitching data
3. Setting the back tacking details
4. Confirming the data
Memo
Or press the MULTI, REVERSE MULTI, OFFSET key on the arrow input screen to directly
display the MULTI, REVERSE MULTI, OFFSET setting screen.
[9]-34
* After returning to the Input Method
Setting screen, press the back tacking
details
setting key
* The details are set on this screen.
(The details set here are,
back tacking), overlap mode
three overlap stitches.)
* After inputting the details, press
to set the data.
* The system will return to the input
method setting screen.
* Press
values.
The system will return to the arrow
input screen.
* Determine the B, C D and A points
with the broken line procedures, and
create the broken line data.
* After creating the broken line data,
input
* The offset data will be displayed on
the image screen.
.
(overlap
,
to determine the set
.