Mitsubishi PLK-E Series Technical Manual page 160

[Memo] The block range can be confirmed easily when the Image screen is opened from the
(2) screen.
3. Selecting zigzag
4.Setting the zigzag details
[13]-9
*Press
*Press
* Press zigzag
* The details are set on this screen.
(Press
width to 5.0, and feed amount to 3.0.
The creation direction is
*(Refer to section [9] Creating stitching
data (12) Zigzag stitching for details on
the "deflection width, feed amount and
creation direction".)
* Press
Data conversion mode
from the (2) screen.
to return.
.
, set the deflection
.)
.