Mitsubishi PLK-E Series Technical Manual page 117

Modification mode
3. Determining the block modification range (start point)
4. Determining the block modification range (end point)
5. Moving and setting the modification origin jog position
* Using Jog
the start point position.(B point)
* Press
* Using Jog
the end point position.(E point)
* Press Jog Validity
* Press
When the end point is determined, the
work holder will automatically return
to the start point. Take care when the
needle is lowered, etc.
* Using Jog
the position to be modified.
(C point in this example.)
* Press
[12]-30
, , determine
.
, , determine
.
.
, , move to
.