Chapter 3. Programming Site Data
3.8 Entering Analog Inputs
The Analog Input option enables you to specify parameters for general
purpose or energy inputs. To enter the Inputs option, scroll to the Analog
Input entry on the Program Menu and press
enabled the Energy Option (see page 42), the screen appears similar to
Figure 26 below. To step through each parameter, press the [ ] key. Refer
to Figure 148 on page 232 of Appendix A, Menu Maps.
3.8.1 Entering General-Purpose Analog Inputs
Input A
The first prompt asks you to select whether the desired function is off or
1.
general purpose.
Press
a.
[ENTER]
Scroll to the desired response.
b.
Press
c.
[ENTER]
50
Analog Input
Input B
Function
Label
Units
Zero
Span
Figure 26: Analog Inputs Option Window
to open the drop-down menu.
to confirm your selection.
Transport® Model PT878 Portable Liquid Flowmeter User's Manual
[ENTER]
General Purpose
Inlet Temp
*C
0
°C
°C
100
Cancel
. If you have not
OK