Analog Inputs Roc Configuration - GE Kelman DGA900 Operator's Manual

6.7.4 Analog Inputs RoC Configuration

Select Calculations > Analog Inputs Rate of Change to open the Analog Inputs RoC
Configuration page as shown in Figure 6-17. The default is for a CT to be installed on
Analogue Input 1. The product supports up to five additional analogue inputs.
Figure 6-17: Analog Inputs Rate of Change Configuration
MA-025 – DGA 900 Operator Guide – Rev 2.0 12-Apr-19 Page 28 of 92