Figure 4-29 Supply And Ground Cable Clearance (Size 0 To 3); Figure 4-30 Supply And Ground Cable Clearance (Size 4 To 6) - Emerson unidrive sp User Manual

Safety Product Mechanical
Information Information Installation
4.11.5 Compliance with generic emission standards
The following information applies to frame sizes 0 to 5.
Size 6 upwards does not comply with the requirements of the generic
standards for radiated emission.
Size 6 complies with the requirements for conducted emission.
Use the recommended filter and shielded motor cable. Observe the
layout rules given in Figure 4-29. Ensure the AC supply and ground
cables are at least 100mm from the power module and motor cable.

Figure 4-29 Supply and ground cable clearance (size 0 to 3)

Do not modify
the filter wires
Unidrive SP User Guide
Issue Number: 13
Electrical Getting Basic
installation Started parameters
≥100mm
(4in)
≥100mm
(4in)
www.controltechniques.com
Running SMARTCARD
Optimization
the motor operation

Figure 4-30 Supply and ground cable clearance (size 4 to 6)

Onboard Advanced Technical
Diagnostics
PLC parameters Data
100mm (4in)
100mm
(4in)
100mm (4in)
UL Listing
Information
87