Safety
Product
Mechanical
Information
Information
Installation
Figure 3-13 Installation of a keypad on size 0
Figure 3-14 Installation and removal of a keypad on size 1 to 6
To install, align the keypad and press gently in the direction shown until it clicks into position.
To remove, while pressing the tabs inwards (A), gently lift the keypad in the direction indicated (B).
N
NOTE
The keypad can be installed / removed while the drive is powered up and running a motor, providing that the drive is not operating in keypad mode.
36
Electrical
Getting
Basic
installation
Started
parameters
Installing the keypad
www.controltechniques.com
Running
SMARTCARD
Optimization
the motor
operation
Removing keypad
A
Onboard
Advanced
Technical
Diagnostics
PLC
parameters
Data
B
A
Unidrive SP User Guide
Issue Number: 13
UL Listing
Information