Emerson unidrive sp User Manual page 237

Safety Product Mechanical
Information Information Installation
SM-I/O Timer & SM-I/O Lite parameters
Parameter
x.01 Solutions Module ID
x.02 Solutions Module software version
x.03 Current loop loss indicator
x.04 T5 digital input 1 state
x.05 T6 digital input 2 state
x.06 T7 digital input 3 state
x.07 Relay 1 state
x.14 T5 digital input 1 invert
x.15 T6 digital input 2 invert
x.16 T7 digital input 3 invert
x.17 Relay 1 invert
x.19 Real time clock daylight saving mode
x.20 Digital I/O read word
x.24 T5 digital input 1 destination
x.25 T6 digital input 2 destination
x.26 T7 digital input 3 destination
x.27 Relay 1 source
x.30 Real time clock update mode
x.34 Real time clock time: minutes.seconds
x.35 Real time clock time: days.hours
x.36 Real time clock time: months.days
x.37 Real time clock time: years
x.38 Analog input 1 mode
x.39 Analog output mode
x.40 Analog input 1
x.41 Analog input 1 scaling
x.42 Analog input 1 invert
x.43 Analog input 1 destination
x.48 Analog output 1 source
x.49 Analog output 1 scaling
x.50 Solutions Module error status*
x.51 Solutions Module software sub-version
RW Read / Write RO Read only
FI Filtered DE Destination
*See trip SLX.Er, Automation (I/O Expansion) module category on page 294.
Unidrive SP User Guide
Issue Number: 13
Electrical Getting Basic
installation Started parameters the motor
Range( )
0 to 599
0.00 to 99.99
OFF (0) or On (1)
OFF (0) or On (1)
OFF (0) or On (1)
OFF (0) or On (1)
OFF (0) or On (1)
OFF (0) or On (1)
OFF (0) or On (1)
OFF (0) or On (1)
OFF (0) or On (1)
OFF (0) or On (1)
0 to 255
Pr 0.00 to Pr 21.51
Pr 0.00 to Pr 21.51
Pr 0.00 to Pr 21.51
Pr 0.00 to Pr 21.51
0 to 2
0.00 to 59.59
1.00 to 7.23
0.00 to 12.31
2000 to 2099
0-20 (0), 20-0 (1), 4-20.tr (2),
20-4.tr (3), 4-20 (4), 20-4 (5),
VOLt(6)
0-20 (0), 20-0 (1), 4-20 (2), 20-4 (3),
VOLt (4)
±100.0%
0 to 4.000
OFF (0) or On (1)
Pr 0.00 to Pr 21.51
Pr 0.00 to Pr 21.51
0.000 to 4.000
0 to 255
0 to 99
Uni Unipolar Bi
NC Not copied RA
www.controltechniques.com
Running SMARTCARD
Optimization
operation
Default( )
SM-I/O Timer: 203
SM-I/O Lite: 207
OFF (0)
OFF (0)
OFF (0)
OFF (0)
OFF (0)
Pr 0.00
Pr 0.00
Pr 0.00
Pr 0.00
0
0-20 (0)
0-20 (0)
1.000
OFF (0)
Pr 0.00
Pr 0.00
1.000
Bi-polar Bit Bit parameter
Rating dependent PT Protected
Onboard Advanced Technical
Diagnostics
PLC parameters Data
Type
RO Uni PT US
RO Uni NC PT
RO Bit NC PT
RO Bit NC PT
RO Bit NC PT
RO Bit NC PT
RO Bit NC PT
RW Bit
RW Bit
RW Bit
RW Bit
RW Bit
RO Uni NC PT
RW Uni DE PT US
RW Uni DE PT US
RW Uni DE PT US
RW Uni PT US
RW Uni NC
RW Uni NC PT
RW Uni NC PT
RW Uni NC PT
RW Uni NC PT
RW Txt
RW Txt
RO Bi NC PT
RW Uni
RW Bit
RW Uni DE PT US
RW Uni PT US
RW Uni
RO Uni NC PT
RO Uni NC PT
Txt Text string
US User save PS
UL Listing
Information
SM-I/O
Lite Timer
US
US
US
US
US
US
US
US
US
US
Power down save
237