Declaration Of Conformity (Size 4-5); Table 3-3 Quantity Of Nylon Washers Supplied With Table - Emerson unidrive sp User Manual

Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
SP4201 SP4202 SP4203
SP4401 SP4402 SP4403
SP4601 SP4602 SP4603
SP5601 SP5602
The AC variable speed drive products listed above have been designed
and manufactured in accordance with the following European
harmonised standards:
Adjustable speed electrical power drive
EN 61800-5-1:2007 systems - safety requirements - electrical,
thermal and energy
Adjustable speed electrical power drive
EN 61800-3:2004 systems. EMC product standard including
specific test methods
Electromagnetic compatibility (EMC).
EN 61000-6-2:2005 Generic standards. Immunity standard for
industrial environments
Electromagnetic compatibility (EMC).
EN 61000-6-4:2007 Generic standards. Emission standard for
industrial environments
8

Declaration of Conformity (Size 4-5)

SP5201 SP5202
SP5401 SP5402
SP4604 SP4605 SP4606
www.controltechniques.com
These products comply with the Low Voltage Directive 2006/95/EC and
the Electromagnetic Compatibility Directive 2004/108/EC.
T. Alexander
Vice President, Technology
Newtown
Date: 14th July 2009
These electronic drive products are intended to be used with
appropriate motors, controllers, electrical protection components
and other equipment to form complete end products or systems.
Compliance with safety and EMC regulations depends upon
installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by
professional assemblers who are familiar with requirements for
safety and EMC. The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the
country where it is to be used. Refer to the User Guide. An EMC
Data Sheet is also available giving detailed EMC information.
Unidrive SP User Guide
Issue Number: 13