Safety
Product
Mechanical
Information
Information
Installation
5. Assemble the remaining cables in the lower row, replace the M10
nuts and secure to 15 N m.
7. Replace terminal cover.
9. View showing the output terminals with grommets and power cables fitted.
34
Electrical
Getting
Basic
installation
Started
parameters
www.controltechniques.com
Running
SMARTCARD
Optimization
the motor
operation
6. Follow similar procedure for top row.
8. Installation of double grommets on the power terminals of a Unidrive
SP size 6 module where two cables per phase are required.
Onboard
Advanced
Technical
Diagnostics
PLC
parameters
Data
Unidrive SP User Guide
Issue Number: 13
UL Listing
Information