Emerson unidrive sp User Manual page 108

Safety Product Mechanical
Information Information Installation
Parameter
SMARTCARD parameter
0.29
data
0.30 Parameter copying
0.31 Drive rated voltage
Maximum Heavy Duty
0.32
current rating
OL> Catch a spinning motor { 6.09 }
0.33
VT> Rated rpm autotune
0.34 User security code
0.35 Serial comms mode
0.36 Serial comms baud rate
0.37 Serial comms address
0.38 Current loop P gain
0.39 Current loop I gain
0.40 Autotune
Maximum switching
0.41
frequency
0.42 No. of motor poles
OL & VT> Motor rated
power factor
0.43
SV> Encoder phase angle
0.44 Motor rated voltage
OL & VT> Motor rated full
load speed (rpm)
0.45
SV> Motor thermal time
constant
0.46 Motor rated current
0.47 Rated frequency
0.48 Operating mode selector
0.49 Security status
0.50 Software version
0.51 Action on trip detection
* Modes 1 and 2 are not user saved, Modes 0, 3 and 4 are user saved
Key:
Coding
OL Open loop
CL Closed loop vector and Servo
VT Closed loop vector
SV Servo
{X.XX} Copied advanced parameter
RW Read/write: can be written by the user
RO Read only: can only be read by the user
Bit 1 bit parameter: 'On' or 'OFF' on the display
Bi Bipolar parameter
Uni Unipolar parameter
Txt Text: the parameter uses text strings instead of numbers.
Filtered: some parameters which can have rapidly changing
FI values are filtered when displayed on the drive keypad for
easy viewing.
Destination: This parameter selects the destination of an
DE
input or logic function.
108
Electrical Getting Basic
installation Started parameters
Range( )
OL VT
{ 11.36 } 0 to 999
{ 11.42 } nonE (0), rEAd (1), Prog (2), AutO (3), boot (4)
{ 11.33 } 200 (0), 400 (1), 575 (2), 690 (3) V
{ 11.32 } 0.00 to 9999.99A
0 to 3
{ 5.16 } 0 to 2
{ 11.30 } 0 to 999
{ 11.24 } AnSI (0), rtu (1), Lcd (2)
300 (0), 600 (1), 1200 (2), 2400 (3), 4800 (4),
9600 (5), 19200 (6), 38400 (7),
{ 11.25 }
57600 (8) Modbus RTU only,
115200 (9) Modbus RTU only
{ 11.23 } 0 to 247
{ 4.13 } 0 to 30,000
0 to 30,000
{ 4.14 }
{ 5.12 } 0 to 2 0 to 4
{ 5.18 } 3 (0), 4 (1), 6 (2), 8 (3), 12 (4), 16 (5) kHz
{ 5.11 } 0 to 60 (Auto to 120 pole)
{ 5.10 } 0.000 to 1.000
{ 3.25 }
{ 5.09 } 0 to AC_voltage_set_max V
0.00 to
0 to 180,000
{ 5.08 } 40,000.00
rpm
rpm
{ 4.15 }
{ 5.07 } 0 to Rated_current_max A
0 to 3,000.0 0 to 1,250.0
{ 5.06 }
Hz Hz
OPEn LP (1), CL VECt (2),
{ 11.31 }
SErVO (3), rEgEn (4)
{ 11.44 } L1 (0), L2 (1), Loc (2)
{ 11.29 } 1.00 to 99.99
{ 10.37 } 0 to 15
Attribute
www.controltechniques.com
Running SMARTCARD
Optimization
the motor operation
SV OL
0
All voltage
ratings: 20
All voltage
ratings 40
0 to 6
0 (Auto)
0.0 to 359.9°
400V drive: EUR> 400, USA> 460
EUR> 1,500
USA> 1,800
0.0 to 3000.0
Drive rated current [ 11.32 ]
EUR> 50.0
USA> 60.0
OPEn LP (1)
Coding
Rating dependent: this parameter is likely to have different
values and ranges with drives of different voltage and
current ratings. Parameters with this attribute will not be
transferred to the destination drive by SMARTCARDs when
RA the rating of the destination drive is different from the
source drive and the file is a parameter file. However, with
software V01.09.00 and later the value will be transferred if
only the current rating is different and the file is a
differences from default type file.
Not copied: not transferred to or from SMARTCARDs
NC
during copying.
PT Protected: cannot be used as a destination.
User save: parameter saved in drive EEPROM when the
US
user initiates a parameter save.
Power-down save: parameter automatically saved in drive
EEPROM when the under volts (UV) trip occurs. With
PS software version V01.08.00 and later, power-down save
parameters are also saved in the drive when the user
initiates a parameter save.
Onboard Advanced Technical
PLC parameters Data
Default( )
VT SV
0 RO Uni
nonE (0) RW Txt
RO Txt
RO Uni
RW Uni
0 RW Uni
0 RW Uni
rtU (1) RW Txt
19200 (6) RW Txt
1 RW Uni
200V drive: 75
400V drive: 150
RW Uni
575V drive: 180
690V drive: 215
200V drive: 1000
400V drive: 2000
RW Uni
575V drive: 2400
690V drive: 3000
0 RW Uni
3 (0) 6 (2) RW Txt
6 POLE (3) RW Txt
0.850 RW Uni
0.0 RW Uni
200V drive: 230
RW Uni
575V drive: 575
690V drive: 690
EUR>
1,450.00
RW Uni
USA>
1,770.00
20.0 RW Uni
RW Uni
RW Uni
CL VECt (2) SErVO (3) RW Txt
RW Txt
RO Uni
0 RW Uni
Attribute
Unidrive SP User Guide
UL Listing
Diagnostics
Information
Type
NC PT US
NC *
NC PT
NC PT
US
US
NC PT PS
US
US
US
US
US
RA US
US
US
US
RA US
US
US
RA US
US
NC PT
PT US
NC PT
US
Issue Number: 13