Declaration Of Conformity (Size 1-3) - Emerson unidrive sp User Manual

Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
SP1201 SP1202 SP1203
SP2201 SP2202 SP2203
SP3201 SP3202
SP1401 SP1402 SP1403
SP2401 SP2402 SP2403
SP3401 SP3402 SP3403
SP3501 SP3502 SP3503
The AC variable speed drive products listed above have been designed
and manufactured in accordance with the following European
harmonised standards:
Electronic equipment for use in power
EN 61800-5-1:2007
installations
Adjustable speed electrical power drive
EN 61800-3:2004 systems. EMC product standard including
specific test methods
Electromagnetic compatibility (EMC).
EN 61000-6-2:2005 Generic standards. Immunity standard for
industrial environments
Electromagnetic compatibility (EMC).
EN 61000-6-4:2007 Generic standards. Emission standard for
industrial environments
Electromagnetic compatibility (EMC), Limits,
1
Limits for harmonic current emissions
EN 61000-3-2:2006
(equipment input current <16A per phase)
Electromagnetic compatibility (EMC), Limits,
Limitation of voltage fluctuations and flicker
EN 61000-3-3:2008
in low-voltage supply systems for equipment
with rated current <16A
1
These products are for professional use, and power input exceeds
1kW for all models, so no limits apply.
Unidrive SP User Guide
Issue Number: 13

Declaration of Conformity (Size 1-3)

SP1204
SP1404 SP1405
SP2404
SP3504 SP3505 SP3506
www.controltechniques.com
These products comply with the Low Voltage Directive 2006/95/EC and
the Electromagnetic Compatibility Directive 2004/108/EC.
SP1406
SP3507
T. Alexander
Vice President, Technology
Newtown
Date: 14th July 2009
These electronic drive products are intended to be used with
appropriate motors, controllers, electrical protection components
and other equipment to form complete end products or systems.
Compliance with safety and EMC regulations depends upon
installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by
professional assemblers who are familiar with requirements for
safety and EMC. The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the
country where it is to be used. Refer to the User Guide. An EMC
Data Sheet is also available giving detailed EMC information.
7