Electrical Installation - Emerson unidrive sp User Manual

Safety Product Mechanical
Information Information Installation
1.11

Electrical installation

1.11.1 Electric shock risk
The voltages present in the following locations can cause severe electric
shock and may be lethal:
AC supply cables and connections
Output cables and connections
Many internal parts of the drive, and external option units
Unless otherwise indicated, control terminals are single insulated and
must not be touched.
1.11.2 Stored charge
The drive contains capacitors that remain charged to a potentially lethal
voltage after the AC supply has been disconnected. If the drive has been
energized, the AC supply must be isolated at least ten minutes before
work may continue.
12
Electrical Getting Basic
installation Started parameters
www.controltechniques.com
Running SMARTCARD
Optimization
the motor operation
Onboard Advanced Technical
Diagnostics
PLC parameters Data
Unidrive SP User Guide
Issue Number: 13
UL Listing
Information