Figure 3-37 Installation Of Ip54 Insert For Size 1; Figure 3-38 Installation Of Ip54 Insert For Size 2 - Emerson unidrive sp User Manual

Safety Product Mechanical
Information Information Installation

Figure 3-37 Installation of IP54 insert for size 1

5
IP54 insert
IP54 insert
gasket
6
7
8
In order to remove the IP54 insert, repeat steps (1), (2) and (3), reverse
steps (7), (6), (5) and (4) and repeat steps (8) and (9).
Unidrive SP User Guide
Issue Number: 13
Electrical Getting Basic
installation Started parameters
3
Remove metal clip (1).
1
2
Push tab in the direction
shown (2) and lift hinged
baffle as shown (3)
4
Remove IP54 insert from
hinged baffle by releasing
clip (4).
Rotate the IP54 insert
o
through 180 so that the
flat side faces away from
the fan (5).
Remove the backing from
the IP54 insert gasket and
stick it into the recess of
the IP54 insert (6). (The
gasket can be found in
the accessories box.)
Lower IP54 insert into
position as shown (7).
9
Close hinged baffle (8)
and click into position.
Replace metal clip (9).
www.controltechniques.com
Running SMARTCARD
Optimization
the motor operation

Figure 3-38 Installation of IP54 insert for size 2

In order to remove the IP54 insert, repeat steps (1) (2) and (3), reverse
steps (5) and (4) and repeat step (6).
For sizes 4 to 6 it may be necessary to improve the rigidity of the through
panel mounting surface due to the larger distance between the top and
bottom mounting brackets and the need to maintain compression on the
gasket.
Onboard Advanced Technical
Diagnostics
PLC parameters Data
3
2
1
1
Push plastic tabs in the
direction shown (1).
Push tab in the direction
shown (2), and lift hinged
baffle as shown (3).
5
Take IP54 insert from
the accessories box (4).
Lower the IP54 insert into
the ventilation hole in the
heatsink (5).
6
Close hinged baffle (6)
and click into position,
ensuring tabs locate
correctly.
UL Listing
Information
4
51