Hardware - LXNAV LX9000 User Manual

LX9000 Version 2.6
The lower-middle button will toggle all units between imperial and metric units.
Glider ballast can be entered as:
•
overload factor, which is defined as:
overload
•
Load, which is entered in kg/m
•
Weight of water ballast. If this option is used the weights of the glider and pilot
must be entered. Refer to Chapters 5.1.13 and 5.1.2 for more details of how to enter
glider and pilot weights.

5.1.12 Hardware*

Use this menu to define hardware properties such as total energy compensation, LCD
indicators layout, compass calibration, FLARM module settings, AHRS calibration, NMEA
output and data which will be exchanged between the rear and front digital units. Some
items may be greyed out when the selected option is not available.
Empty . glider . weight
=
Minimum
2 2
or lb/ft
Page 49 of 130
+ +
Pilot . weight
. glider . weight
.
September 2011
Water . ballast