LX90xx/LX80xx Version 5.0
June 2015
5.1.12 Hardware*
Use this menu to define hardware properties such as total energy compensation, vario
indicators layout, compass calibration, FLARM module settings, AHRS settings, NMEA output
and data which will be exchanged between the rear and front display units. Some items
may be greyed out when the selected option is not available.
5.1.12.1
Vario unit settings – TE compensation*
All settings in this menu are related to the glider and thus they do not depend on profile
selection. In this manual dialog description is given for firmware version 5.0 or higher with
V5, V8, V9, V80 variometer. In case older version or older variometer is being used, please
refer to previous version of manual.
Total energy compensation, temperature offset, airspeed offset and digital inputs are setup
in this menu.
Page 66 of 166