Display; Files And Transfers; Uploading User Airspace And Way Points - LXNAV LX8000 User Manual

LX8000 (LX8080) Version 2.6
The external switch wired to the vario unit has absolute priority and will override
all other switching methods.

5.1.4 Display

The display menu controls screen brightness. The LX8000 has an ambient light sensor which
detects ambient light and automatically increases or reduces the brightness of the screen.
If the Automatic brightness checkbox is selected, the instrument will automatically adjust
brightness according to current light conditions. Minimum and Maximum brightness
items control value limits.
conditions or darker conditions will occur. Default values are tuned to human eyes and do
not require change.
Night mode brightness defines maximum brightness when instrument is operating in
night mode. In night mode, brightness is reduced to very low value to reduce difference
between ambient light and device backlit.
If you want to set the brightness manually uncheck the Automatic brightness control and
set the brightness manually.
It is recommended that the automatic brightness control is always enabled.
Reducing brightness will also reduce power consumption. See technical data for
more details (Chapter 3.1.6).

5.1.5 Files and Transfers

The Files and transfer menu is used to manage the way point, airspace and airport
databases.

5.1.5.1 Uploading User Airspace and Way Points

Databases can be loaded from a SD card or USB stick. Select the type of database you wish
to upload and press the LOAD button.
Use time values to setup how fast adaptation to brighter
Page 23 of 110
September 2011