Logger - Flight Recorder Settings; Airspace Management - LXNAV LX Zeus Mobile User Manual

2.1.7 Logger - Flight recorder settings

LX Zeus uses Colibri II as an IGC approved flight
recorder. Both units collaborate so that all necessary
settings can be sent to flight recorder (Colibri II) via Zeus
and meaning that no actions on Colibri II are necessary.
Recording interval is set to 9 seconds per default; event
repetitions are set to 20 and event fix interval to 1.
Extra recording means that user can select also
recording of Ground speed into log file.
This menu is usable only if Colibri II is connected to
Zeus. If you change settings, these settings won't
change in Flarm or any other Loggers.
In a double seat configuration the second seat pilot is
also able to change logger settings. The process is equal
as on first seat.
Pilot and glider data are sent after task Declaration
process has been executed. See section flying.

2.1.8 Airspace management

All settings connected to AS management are available in this
menu.
Hide airspace above option will remove airspace
sections which are higher than set. This will reduce
load on graphic page significantly.
1000
m
Example of Hide airspace above
Default warnings for airspaces are set to 2 km horizontally and 100 m vertically, but these warning
settings can be adjusted.
LX Zeus v 3.0
Note!
Note!
Show on zoom, defines appearance of particular
airspace sections on the display. Appearance is
connected to zoom.AS warning can be set as active or
as not active ().
25.6.2014
- 24 -