Files And Transfers; Uploading User Airspace And Waypoints By Using Load Button - LXNAV LX90 Series Manual

Rev #2
Checking Auto brightness on vario while enable automatic regulation of brightness on
vario unit, if available. If this option is unchecked the vario unit will always run at full
backlight.
It is recommended that the automatic brightness control is always enabled.
Reducing brightness will also reduce power consumption. See technical data for
more details (Section 2.1.6).
5.1.4

Files and Transfers

The Files and Transfer menu is used to manage the waypoint, airspace and airport
databases, recorded flights, flight declaration, PDF documents and Checklists.
Within a profile the user can selected different airport databases, airspace and waypoint
files. Selected files can be stored inside the main display unit or on an inserted SD card or
USB stick.
It is also possible to upload files from SD card or USB stick to main display unit.
Waypoints, Tasks and Flights can also be uploaded to LXNAV Connect.
TO LC function:
After pressing TO LC a window with registered storage services will pop up. The user has
to select a service or email and press SEND.

5.1.4.1 Uploading User Airspace and Waypoints by using LOAD button

Airspace and Waypoints can be loaded from a SD card or USB stick or LXNAV Connect
storage services. Select the type of database you wish to load and press the LOAD button.
Version 7.10
Page 29 of 145
January 2020