Making/Answering Calls; Making Calls; Answering Calls; Useful Features During A Call - Panasonic KX-PRW130C Operating Instructions Manual

Making calls

1
Lift the handset and dial the phone
number.
R To correct a digit, press MClearN.
2
Press M N.
3
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press MZN.
2
When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/
M N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
M N
Erasing a number in the redial list
1
MEN REDIAL
2
MbN: Select the desired phone number.
a MEraseN
3
MbN: "Yes" a MSelectN a MOFFN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 18).
PRW130C(en)_0311_ver110.pdf
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
2
Note:
R A 3.5 second pause is inserted each time

Answering calls

1
2
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 23).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
Adjusting the ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Press MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press and hold MkN
Useful features during a
call
Hold
1
2
3
13

Making/Answering Calls

9 a MDN (Pause)
Dial the phone number. a M
MDN (Pause) is pressed.
Lift the handset and press M
when the unit rings.
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Handset
Base unit
until the unit beeps.
Press MMenuN during an outside call.
MbN: "Hold" a MSelectN
To release hold, press M
N
N or MZN
N.
N.
13
2014/03/11 13:06:42