Ps Feature Buttons; Ps Ring Group - Panasonic KX-TDA600 Feature Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA600:
Table of Contents

Advertisement

1.13 P
2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—Extension Name
2.11.10 [4-2-1] Portable Station—Extension Settings—Main—Extension Name
PT Programming Manual
[001] System Speed Dialing Number
[002] System Speed Dialing Name
[004] Extension Name

1.13.26 PS Feature Buttons

Description
Although a portable station (PS) does not feature as many buttons as a proprietary telephone (PT), a PS
can be customized to give a PS user access to PBX features, just as the flexible buttons on a PT can be
customized. (→ 1.6.3 Flexible Buttons)

1.13.27 PS Ring Group

Description
A PS ring group is a way for several portable stations (PSs) to be notified of an incoming call simultaneously,
while using only one channel of a cell station (CS).
Normally when a PS receives a call, one channel of a CS is used to ring the PS (→ 1.13.24 PS Connection).
If several PSs are members of an incoming call distribution (ICD) group, the available channels of a CS will
become busy just by ringing each PS. Assigning a group of PSs to a PS ring group alleviates this strain on
the CS because only one channel is needed to ring a PS ring group's members.
PS ring group members and related parameters are assigned through system programming, as explained
below.
a)
Floating Extension Number: When this number is called, all PSs in the group ring.
b)
Group Name: Can be displayed on a ringing PS to indicate that the incoming CO line call is a
group call, and not a call directed to the PS's extension number. This is only available when
Incoming CO Line Call Information Display is set to "Called Number".
c)
Incoming CO Line Call Information Display: Determines which information is shown on the PS
display when a group call is received. Select "Caller ID" to display the caller's telephone number
or name, or "Called Number" to display the name of the PS ring group which is receiving the call.
d)
Member PSs: Select each PS that will be a member of the corresponding PS ring group. Note that
a PS can belong to more than one PS ring group.
260
Feature Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200Kx-tda50Kx-tda100

Table of Contents