Section 700 - Operation
Technical Manuals Online! - http://www.tech-man.com
Trunks can be placed in trunk groups. When a trunk group is accessed, the
DBS automatically selects an open trunk from the group.
To access a trunk group, do one of the following:
Dial a trunk group access code before dialing the telephone number. Trunk
group access codes are 9, 8 1,82, 83,84,85, and 86.
Press an FF key that is assigned as a pooled trunk key.
FF2 (Trunks): Pooled Trunk Access for Group "9"
FF2 (Trunks): Pooled Trunk Access for Groups "8 l-86"
Trunks can appear in more than one trunk group.
If Least Cost Routing is enabled. the trunk group "9" automatically
accesses the LCR features.
Chapter 2. System Features