Audible Tone Features; Dial Tone - Panasonic KX-TEM824 Features Manual

1.22 Audible Tone Features

1.22.1 Dial Tone

Description
The following dial tones inform extension users about features activated on their extensions:
Type
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Conditions
• Dial Tone Type for ARS
Through system programming, it is possible to select the dial tone type for the Automatic Route
Selection (ARS) feature (
Feature Guide References
4.2.1 Tones/Ring Tones
A normal dial tone is heard when none of the features listed for dial tones 2
through 5 have been set.
Heard when any of the following features is set.
• Absent Message
• Background Music (BGM) (for proprietary telephones [PTs] only)
• Call Forwarding (FWD)
• Call Pickup Deny
• Data Line Security
• Do Not Disturb (DND)
• Extension Lock
• Hot Line (for single line telephones [SLTs] only)
• Message Waiting (for PTs only)
• Remote Extension Lock
• Timed Reminder
Heard when any of the following features is performed.
• Account Code Entry
• Answering a call from Timed Reminder
• Going off-hook with an SLT that has messages waiting
Heard when going off-hook if new voice messages have been recorded (Built-in
Voice Message [BV]).
Heard when going off-hook if the remaining voice message recording time is less
than 5 minutes or if 125 voice messages have been recorded (Built-in Voice
Message [BV]).
ARS Dial Tone [362]).
1.22 Audible Tone Features
Description
Feature Guide 157