Walking Extension - Panasonic KX-TDA30 Features Manual

1.28 Extension Controlling Features

1.28.3 Walking Extension

Description
It is possible to use any extension and have your extension settings available to you. Settings such as
extension number, one-touch dialling memory, and COS are all available to you at the new location.
[Example] This feature is useful when:
• Moving location
• There is no specific desk for your use.
This feature is also known as Walking Station.
Conditions
[General]
• This feature allows extension settings to be switched between PTs (including IP-PTs) and SLTs. Moving
between tenants is also possible.
• Incoming calls to your extension will also reach you at your new location.
• An extension personal identification number (PIN) is required to use this feature. (→ 1.28.1 Extension
Personal Identification Number (PIN))
• If a DSS Console is connected to a PT and the DSS Console is continuously used with the PT after
Walking Extension has been activated, the new extension number of the PT must be assigned as the
paired extension through system programming.
• If PC programming is being performed for extensions whose extension settings are being transferred
by the Walking Extension feature, the Walking Extension feature may not work properly (→ 2.3.1 PC
Programming).
Programming Manual References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Features—Walking Extension
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—Extension PIN
2.10.17 [4-3] DSS Console—Flexible Button—Pair Extension
PT Programming Manual
[007] DSS Console Paired Telephone
User Manual References
1.12.1 Using the Same Settings as Your Previous Extension (Walking Extension)
326 Feature Guide