Verify the NIS Setting on Exalogic
Note:
It is assumed that you have a working NIS or LDAP service on your network.
This chapter does not describe how to set up the NIS or LDAP service.
9.2 Verify the NIS Setting on Exalogic
To verify the NIS setting in your storage appliance, complete the following steps:
Log in to the Browser User Interface (BUI) of the storage appliance in your Exalogic
1.
machine.
Click Configuration > SERVICES > NIS. NIS Server configuration information is
2.
displayed, as shown in
Note down the domain name and the server IP address listed on the page. You
3.
require this information when setting up NIS clients on Exalogic compute nodes. If
you do not see configuration information on this page, it means that you should
install an NIS Server.
nisdomain.example.com.
Figure 9-1
9.3 Configure the Storage Appliance
You must configure two services in the storage appliance for using NFSv4 on Exalogic:
•
Configure the NFS Service
•
Configure the NIS Service
9-2 Oracle Exalogic Elastic Cloud Machine Owner's Guide
Figure
9-1.
Figure 9-1
uses an example NIS domain
NIS Service