Oracle Exalogic Elastic Cloud Owner's Manual page 328

Create a Solaris Zone
Click iSCSI Initiators.
6.
Click the plus button next to iSCSI Initiators to create a new iSCSI initiator.
7.
In the Initiator IQN field, enter the initiator IQN you identified in step 1.
8.
In the Alias field, enter a name for the iSCSI initiator you are creating.
9.
If you are using CHAP authentication, select the Use CHAP check box and fill in
10.
the Initiator CHAP name and Initiator CHAP secret fields as you did in
an iSCSI
Click OK.
11.
Add the iSCSI initiator to an iSCSI initiator group by dragging and dropping the
12.
initiator.
If required, you can create a new iSCSI initiator group.
F.3.1.3 Create the Project and LUN
You can create the project and LUN by doing the following:
Create a project as described in
1.
You can create the LUN by doing the following:
2.
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
F-4 Oracle Exalogic Elastic Cloud Machine Owner's Guide
Target.
Note:
For more information on setting up CHAP authentication between the
compute node and storage appliance, see the "Setting Up CHAP
Authentication" topic in the following document:
www.oracle.com/technetwork/server-storage/sun-unified-
storage/documentation/iscsi-quickstart-
v1-2-051512-1641594.pdf
Next to the Project, click Shares.
Click LUNs.
The list of LUNs appears.
Click the plus button next to LUNs.
In the Project field, select the project you created in step 1.
In the Name field, enter a name for the LUN.
Enter the size of the volume in GB.
Select Thin provisioned.
Set the Volume block size as 32k.
In the Target Group field, select the target group you used in
Target.
In the Initiator Group field, select the initiator group you used in
iSCSI Initiator.
http://
Create Custom Projects.
Create
Create an iSCSI
Create an