Software And Operating Systems Known Issues; New Sp Ip Setting Is Not Displayed In Bios Utility - Oracle Sun Fire X4170 M2 Product Notes

Known Issues

Software and Operating Systems Known Issues

"New SP IP setting is not displayed in BIOS utility" on page 26
■
"SP network setting changes are not saved in the system" on page 27
■
"System fails to boot after upgrading from SW 1.3 to SW 1.6 or SW 1.7" on page 27
■
"Resetting the System During POST Might Generate Spurious DIMM
■
Faults" on page 28
"Warning messages appear when booting Oracle Solaris" on page 29
■
"Solaris 10 U11 Installation Might Fail with InfiniBand Option Card
■
Installed" on page 29
""EHCI BIOS handoff failed" message appears" on page 30
■
"PXE boot might fail after running Pc-Check diagnostics" on page 31
■
"After running Pc-Check diagnostics, an operating system install or boot might hang at the
■
GRUB menu" on page 31
"Oracle Linux 5.8 might hang when starting Bluetooth service" on page 31
■
"Oracle Linux or RHEL OS boot fails after one or more Sun Flash Accelerator F20 PCIe
■
HBAs are added" on page 32
"Disk address changes after warm reboot of Oracle Linux 6.1" on page 33
■
"Error messages appear in RHEL 6.1 related to PCI and GHES" on page 33
■
"During a reboot of the system, a kernel panic might occur" on page 34
■
"InfiniBand Host Channel Adapter might fail after Oracle Linux 6.5 is
■
installed" on page 34
"Oracle Linux might panic at boot time" on page 35
■
"System experiences frequent hard resets with freeipmi-bmc-watchdog
■
installed" on page 35
"Alignment message appears in System Log" on page 36
■

New SP IP setting is not displayed in BIOS utility

Bug ID 27374650
From the BIOS utility, if you change the SP IP address from static to DHCP, or you set the
sideband with DHCP, the new SP IP address does not display in the BIOS utility.
Affected Software:
Software Releases 1.10 and 1.10.1
■
Workaround:
26 Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018