Oracle Exalogic Elastic Cloud Owner's Manual page 156

Set Up Ethernet Over InfiniBand (EoIB) on Oracle Solaris
root@el01cn16:~# ipadm set-ifprop -p standby=on -m ip vnic3066_1
root@el01cn16:~# ipmpstat -i
INTERFACE
vnic3066_1 no
vnic3066_0 yes
bond0_1
bond0_0
From the session to switch el01sw-ib03 run the following command to verify
15.
that the active VNIC is up on the switch el01sw-ib03:
[root@el01sw-ib03 ~]# showvnics |grep cn16
105 UP
80:C0:A0:09:16:01 NO 0xffff 0A-ETH-1
106 UP
02:08:20:42:A1:F1 3066 0x8206 0A-ETH-1
On the switch el01sw-ib02, the passive VNIC is not expected to appear until the
16.
IPMP group failover process runs. From the session to the switch el01sw-ib02
run the following command to verify the state of the VNIC:
[root@el01sw-ib02 ~]# showvnics|grep cn16
108 UP
00:14:4F:09:16:02 NO 0xffff 0A-ETH-1
10-16 Oracle Exalogic Elastic Cloud Machine Owner's Guide
ACTIVE GROUP FLAGS
bond1 is-----
bond1 --mbM--
no bond0 is-----
yes bond0 --mbM--
N 0021280001EFF369
H 0021280001EFF369
N 0021280001EFF36A
LINK PROBE STATE
up disabled ok
up disabled ok
up disabled ok
up disabled ok
el01cn16 EL-C 192.168.10.16 31744
el01cn16 EL-C 192.168.10.16 64513
el01cn16 EL-C 192.168.10.16 31744