Oracle Exalogic Elastic Cloud Owner's Manual page 329

Click Apply.
k.
Note the GUID of the LUN you created in the list of LUNs. For example,
l.
g600144f09c96cca900005190bfc4000a.
Note:
After creating the LUN, ensure that the Write cache enabled check box is
deselected. You can find this check box in the Protocols tab of the LUN.
F.3.1.4 Disable the Write Cache
You must disable the write cache on the LUN permanently by doing the following:
Log in to the compute node for which you identified the initiator node name as
1.
described in Create an iSCSI
Edit the /kernel/drv/sd.conf file.
2.
Add the following to the sd.conf file:
3.
sd-config-list="SUN
"SUN
"SUN
"SUN
write-cache-disable=1,0x00008,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0;
Restart the compute node by running the reboot command.
4.
F.3.1.5 Format the LUN
Before the compute node can use the LUN, you must format the LUN. You can format
the LUN by doing the following:
Log in to a compute node as the root user.
1.
Run the iscsiadm commands to discover the iSCSI targets from the compute
2.
node:
# iscsiadm add discovery-address IPoIB_address_of_the_storage_appliance
# iscsiadm modify discovery -t enable
In this example, IPoIB_address_of_the_storage_appliance is the IP
address of the storage appliance on the IPoIB network.
Run the following command to load drivers, attach device instances, create logical
3.
links to device nodes, and load the device policy for iSCSI:
# devfsadm -c iscsi
Identify the disk you should format and label by running echo | format as
4.
follows:
# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t600144F09C96CCA90000518CDEB10005d0 <SUN-ZFS Storage
7320-1.0-64.00GB>
Initiator.
ZFS Storage 7120","write-cache-disable",
ZFS Storage 7320","write-cache-disable",
ZFS Storage 7420","write-cache-disable",
ZFS Storage 7335","write-cache-disable";
Manage Solaris Zones on Exalogic F-5
Create a Solaris Zone