Oracle Exalogic Elastic Cloud Owner's Manual page 114

Getting Started
Complete the following steps:
Verify that the storage appliance is powered up and on the network.
1.
Connect an Ethernet cable from your network to the NET0 port on the back panel
2.
of the controller (storage server head).
Open a terminal window and use an SSH client to connect to the administrative
3.
console of the storage appliance (ssh root@192.168.128.256). When
prompted, enter the administrative password for the storage appliance that you
set when running Oracle Exalogic Configuration Utility to configure the
Exalogic machine.
a.
b.
c.
d.
e.
Configure the remaining system parameters through a browser running on any
4.
client on the same network as the initial interface. The management software is
designed to be fully featured and functional on the following supported web
browsers: Firefox 2.x and 3.x, Internet Explorer 7, Internet Explorer 8, Safari 3.1 or
later, and WebKit 525.13 or later.
Direct your browser to the storage system using either the IP address or host
5.
name you assigned to the NET0 port as follows:
https://ipaddress:215
or
https://hostname:215
The login screen appears.
Type root into the Username field and the administrative password that you
6.
entered into the appliance shell kit interface and press the Enter key. The
Welcome screen appears.
To begin configuring the system, click Start on the Welcome screen.You are
7.
guided through the Initial Configuration of the remaining network interfaces,
DNS, time settings, directory service, and storage.
8-2 Oracle Exalogic Elastic Cloud Machine Owner's Guide
Tip:
Refer to the Cluster documentation in the Oracle ZFS Storage Appliance
Administration Guide located on
E27998_01/html/E48433/index.html
After login, at the command prompt, type start /SP/console.
Type y to confirm that you want to start the console.
Press any key to begin configuring the appliance. The shell interface
configuration screen appears. NET-0 at the top of the screen should be
underlined.
Verify the information on the screen, or enter values that do not appear.
Apply the values by pressing ESC-1 or the F1 key or by pressing Enter after
confirming the password. The final shell configuration screen appears,
confirming that your appliance is ready for further configuration using the
browser user interface (BUI).
http://docs.oracle.com/cd/
for more information.