Securing Exalogic Machine Using The Leveling Feet - Oracle Exalogic Elastic Cloud Owner's Manual

Prepare to Install an Exalogic Machine
Lower the leveling feet to the floor as shown in
2.
wrench. When lowered correctly, the four leveling feet should support the full
weight of the Exalogic machine.
Figure 3-3
3.2.6.4 Stabilize the Exalogic Machine with Mounting Brackets
The rack can be permanently mounted to the installation site floor using the same
mounting brackets that secured the rack to the shipping pallet. The rack is secured to
the pallet with four mounting brackets. Use the front and rear brackets to stabilize the
rack to the installation floor. Prepare the installation site by drilling four holes into the
floor. Before permanently stabilizing the Exalogic machine with the mounting
brackets, pre-drill the mounting holes.
of the mounting brackets.
3-8 Oracle Exalogic Elastic Cloud Machine Owner's Guide

Securing Exalogic Machine Using the Leveling Feet

Figure 3-3 using the SW 12 mm
Figure 3-4 shows the location and dimensions