Chain Case Oil Seal Installation - Honda Civic 2002-2003 Service Manual

•
•
•
3. Remove old liquid gasket from the chain case cover
mating surfaces, bolts, and bolt holes.
4. Clean and dry the chain case cover mating surfaces.
5. Apply liquid gasket, PIN 08718-000S, evenly to the
chain case mating surface of the chain case cover
and to the inner threads of the holes.
NOTE: Do not install the parts if 5 minutes or more
have elapsed since applying liquid gasket. Instead,
reapply liquid gasket after removing old residue.
Apply liquid gasket
along the broken line.
6. Install the chain case cover.
Chain Case Oil Seal Installation
Special Tool. Required
• Driver 0774S-00 I 0000
• Attachment, 52 x 55 mm 07746-0010400
1. Use the special tools to drive a new oil seal
squarely into the chain case to the specified
installed height.
07746-0010400
2. Measure the distance between the chain case
surface (AI and oil seal
(B).
Oil Sealln.talled Height:
33.0-33.7 mm (1.30-1.33 in.)
B
33.0 33.7 mm
11.30 - 1.33 in.1
6-21