Figure 45: T1200 As Ethernet Connectors; Figure 46: Power Supply Led; Table 15: Dc Power Supply Led Indicators - Oracle Tekelec 1200 Maintenance Manual

Platform Maintenance

Figure 45: T1200 AS Ethernet Connectors

The green LED indicates the connection status for each port. If the port is connected to a network but
there is no current activity, the green LED is continuously illuminated. When there is activity on the
connected network, the green LED blinks.
The bi-color LED indicates the connection speed. If the green LED indicates a network connection but
the bi-color LED is not lit, then the connection speed is 10 Mbps. If the bi-color LED shows a solid
green indication, then the connection speed is 100 Mbps. If the bi-color LED is solid amber, then the
connection speed is 1 Gbps.
DC Power Supply LEDs
The power supply provides a single, external, bi-color LED to indicate its status.
Supply LED shows the power supply LEDs on the rear.

Figure 46: Power Supply LED

The LED blinks green when DC is applied to the PSU and standby voltages are available. The LED
displays solid green when all the power outputs are available. The LED displays solid amber when
the PSU has failed or shut down due to over-current or over-temperature.
See

Table 15: DC Power Supply LED Indicators

Table 15: DC Power Supply LED Indicators
Power Supply Condition
No DC power to all power supplies
No DC power to this power supply (for 1+1
configuration)
OR
910-5680-001 Revision F, February 2014
for LED conditions
Bi-color LED Indication
OFF
Amber
LED Descriptions
Figure 46: Power
74