Figure 7-2: Load A Cmp File Screen; Figure 7-3: Cmp File Successfully Loaded Into The Mediant 2000 Notification - AudioCodes Mediant 2000 Installation Manual

Fast Track Installation Guide
Note:
Click the Start Software Upgrade button; the 'Load a cmp file' screen appears
3.
Note:
Click the Browse button, navigate to the cmp file and click the button Send File; the cmp file
4.
is loaded to the Mediant 2000 and you're notified as to a successful loading (refer to
7-3).

Figure 7-3: cmp File Successfully Loaded into the Mediant 2000 Notification

Note that the four action buttons (Cancel, Reset, Back, and Next) are now activated
5.
(following cmp file loading).
You can now choose to either:
Click Reset; the Mediant 2000 resets, utilizing the new cmp you loaded and utilizing the
current configuration files.
Click Cancel; the Mediant 2000 resets utilizing the cmp, ini and all other configuration
files that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.
Click Back; the 'Load a cmp File' screen is reverted to; refer to
Click Next; the 'Load an ini File' screen opens; refer to
or any other auxiliary file listed in the Wizard is optional.
Version 4.6
At this point, the process can be canceled with no consequence to the Mediant
2000 (click the Cancel button). If you continue the process (by clicking the
Start Software Upgrade button, the process must be followed through and
completed with a Mediant 2000 reset at the end. If you click the Cancel button
in any of the subsequent screens, the Mediant 2000 is automatically reset with
the configuration that was previously burned in flash memory.
When in the Wizard process, the rest of the Web application is unavailable and
the background Web screen is disabled. After the process is completed,
access to the full Web application is restored.

Figure 7-2: Load a cmp File Screen

35
7. Upgrading the Mediant 2000
(Figure
Figure 7-2.
Figure 7-4. Loading a new ini file
7-2).
Figure
July 2005