Starter Clutch - Suzuki FL125S Service Manual

3-49 ENGINE

STARTER CLUTCH

INSPECTION OF STARTER CLUTCH OPERATION
Turn the starter driven gear by hand in the direction of arrow as
shown and check that rotation is smooth. Also check that the
gear is locked when attempted to turn in the other direction.
If a large resistance is felt or noise occurs when turning the gear,
check the starter driven gear sliding surface for wear or damage.
If any abnormal condition is found, replace the starter clutch with
a new one.
DISASSEMBLY
• Remove the starter driven gear.
• Holding the generator rotor with the special tool and remove
the starter clutch inside hexagon bolts.
& 09930-34951: Rotor holder
• Remove the starter clutch 1 from the rotor.
• Remove the one way clutch 2.
INSPECTION
Inspect the starter clutch for damage and excessive wear. If any
defects are found, replace the starter clutch with a new one.
Inspect the starter driven gear for wear or damage. If any
defects are found, replace the starter driven gear with a new
one.