Suzuki FL125S Service Manual page 104

3-67 ENGINE
• Install the clutch springs 9.
• Install the release plate 0 and release plate bolts A.
• Hold the clutch sleeve hub 5 with the special tool and tighten
the release plate bolts A to the specified torque.
& 09930-40113: Rotor holder
" Release plate bolt: 10 N·m (1.0 kgf-m)
• Install the clutch bearing B and clutch push piece C.
• Install the primary drive gear D and primary drive gear spacer
E.
FIRST CLUTCH
• Install the primary drive gear ring 1.
• Install the first clutch housing 2 while expanding the primary
drive gear ring 1.