Suzuki FL125S Service Manual page 178

5-41 CHASSIS
• Turn the steering stem about five or six times to the left and
right so that the steel balls will be seated properly.
• Loosen the stem nut by 1/4 – 1/2 turn.
NOTE:
This adjustment will vary from motorcycle to motorcycle.
NOTE:
When installing the washer, align the stopper lug of washer to
the groove of steering stem.
• Tighten the steering stem lock-nut to the special tool.
& 09910-60611: Universal clamp wrench
NOTE:
Tightening the steering stem lock-nut can affect the steering
stem nut adjustment. Therefore after tightening the steering
stem lock-nut, check the steering movement again and adjust if
necessary.
• Install the front forks and front fender. ($5-33)
• Install the front wheel. ($5-13)
• Install the handlebars. ($5-35)
• Perform the steering inspection after reassembling has been
completed. ($2-21)
1/4 – 1/2 turn